97 Accord Timing Belt Replacement

This topic has 3 replies, 3 voices, and was last updated 10 years, 5 months ago by Matt.

Creator

Topic
July 3, 2014 at 6:18 am #612387
Matt
Participant
I’m planning to replace the valve cover gasket & O-rings due to oil in the spark plug galleys. I’m guessing the timing belt has never been changed but wasn’t quite ready to do that job to. Will I have to replace the brand new valve cover gasket again when I do the timing belt?
Creator

Topic

Viewing 3 replies - 1 through 3 (of 3 total)

Author

Replies
July 3, 2014 at 6:31 am #612392
dan
Moderator
the only reason why you should have too replace the rocker cover gasket again is if for some weird reason the timing belt cover is part of the sealed assembly for the rocker cover, in which i doubt this, usually its a simple plastic cover covering the timing belt.
July 4, 2014 at 11:08 pm #612709
EricTheCarGuy
Keymaster
If the valve cover gasket is new and not gooped up with RTV then you should be able to reuse it just fine.

I have a detailed VManual on that engine that you might find helpful.

1990-2002 Honda F Series Timing Belt Replacement VManual
July 5, 2014 at 7:35 am #612909
Matt
Participant
[quote=”EricTheCarGuy” post=103253]If the valve cover gasket is new and not gooped up with RTV then you should be able to reuse it just fine.

I have a detailed VManual on that engine that you might find helpful.

http://www.ericthecarguy.com/1990-2002-honda-f-series-timing-belt-replacement-vmanual%5B/quote%5D

Bought your vid last night 🙂
Author

Replies

Viewing 3 replies - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Loading…

toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/

situs toto situs toto