Menu

96 Honda Accord LX Ignition Fuse Problems

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 96 Honda Accord LX Ignition Fuse Problems

  • Creator
    Topic
  • July 8, 2012 at 11:00 am #459844
    Trcustoms719Trcustoms719
    Participant

      If it was fine before you doing the distributor work then I would go over everything you did._x000D_
      Maybe you have a wire or something pinched.

    • Creator
      Topic
    Viewing 12 replies - 1 through 12 (of 12 total)
    • Author
      Replies
    • July 9, 2012 at 11:00 am #459846
      EricTheCarGuy 1EricTheCarGuy
      Keymaster

        Defiantly recheck your work but in the end you may need a wiring diagram for that fuse so that you can check the different parts of that circuit.

        July 9, 2012 at 11:00 am #459845
        college mancollege man
        Moderator

          I agree with rechecking your work. if the problem occurred after the distributor_x000D_
          then thats where to start.

          July 11, 2012 at 11:00 am #459847
          dcerratodcerrato
          Participant

            Eric,_x000D_
            _x000D_
            Thanks for the quick response.

            July 11, 2012 at 11:00 am #459848
            EricTheCarGuy 1EricTheCarGuy
            Keymaster

              Can you post a link to the diagram?

              July 13, 2012 at 11:00 am #459849
              dcerratodcerrato
              Participant

                Eric,_x000D_
                _x000D_
                Here is the link that you sent me_x000D_
                _x000D_
                http://www.bbbind.com/tech_database.html_x000D_
                _x000D_
                When you get to this page, type the following in to pull up the correct wiring diagram_x000D_
                _x000D_
                Year: 1996_x000D_
                Make: Honda_x000D_
                Model: Accord_x000D_
                Engine: 2.2_x000D_
                System: Eng

                July 13, 2012 at 11:00 am #459850
                EricTheCarGuy 1EricTheCarGuy
                Keymaster

                  Which fuse is blowing, fuse 15 or fuse 9?

                  July 13, 2012 at 11:00 am #459851
                  dcerratodcerrato
                  Participant

                    its neither of those fuses.

                    July 16, 2012 at 11:00 am #459852
                    EricTheCarGuy 1EricTheCarGuy
                    Keymaster

                      Sorry eyes are getting old, I guess I meant fuse 18 instead of 15.

                      July 16, 2012 at 11:00 am #459853
                      dcerratodcerrato
                      Participant

                        Eric,_x000D_
                        _x000D_
                        I decided to go back and take a second look at the distributor since the fuse blew right after I replaced the external O ring and the shaft seal.

                        July 16, 2012 at 11:00 am #459854
                        EricTheCarGuy 1EricTheCarGuy
                        Keymaster

                          Not sure really other than a dead short inside of it that backfed through the ignition fuse and blew it.

                          July 16, 2012 at 11:00 am #459855
                          dcerratodcerrato
                          Participant

                            I don’t know if the distributor was aftermarket or a Honda original.

                            July 16, 2012 at 11:00 am #459856
                            college mancollege man
                            Moderator

                              Glad to hear that

                            • Author
                              Replies
                            Viewing 12 replies - 1 through 12 (of 12 total)
                            • You must be logged in to reply to this topic.
                            Loading…