Menu

96 Dodge Ram 1500 SLT fog Light trouble shooting

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 96 Dodge Ram 1500 SLT fog Light trouble shooting

  • Creator
    Topic
  • March 18, 2016 at 3:23 am #854362
    David LisleDavid Lisle
    Participant

      Good evening,

      I recently swapped out the dash on my dodge ram and now have stock fog lights in the truck. The only place I could find a wiring harness was a scrap yard and I now have plugged everything in and modified the bumper inserts. My passenger light is on and my drivers side is not both with brand new bulbs.

      I have taken my multimeter to it and am not getting cont. to the Drivers side at the bulb plug. due to rain I have not been able to check the harness at the other end. Other than check the harness itself any where else I should check. The Fuse is good and both relays are functioning.

    • Creator
      Topic
    Viewing 2 replies - 1 through 2 (of 2 total)
    • Author
      Replies
    • March 18, 2016 at 3:44 am #854364
      Shaun FlichelShaun Flichel
      Participant

        Check the bulb as you should get continuity through it

        March 18, 2016 at 4:38 am #854367
        David LisleDavid Lisle
        Participant

          I did a bulb socket swap to see if both bulbs were working and they were. After plugging in the drivers side bulb back into its socket it did not appear to be working until I shut the hood then it turned on. I’ll keep monitoring it just in case it goes out again.

        • Author
          Replies
        Viewing 2 replies - 1 through 2 (of 2 total)
        • You must be logged in to reply to this topic.
        Loading…