- This topic has 64 replies, 3 voices, and was last updated 6 years, 7 months ago by
.
-
Topic
-
At the last days of April I had an opportunity to sell my ´01 Chrysler Sebring for a good price and after that I needed a new ride.
First I was interested in a Chrysler 300M, but my offroading friend told me to by a “real” car, so I did 😉´95 Laredo with a stunning nose V8 engine, A/C, cruise, electric seats etc.
Fitted with a 46RH tranny and a 249 transfer case powering a Dana 35 LSD at a back and Dana 30 in the front.
[url=http://www.upload.ee/image/4601360/DSC_2047.JPG]
[url=http://www.upload.ee/image/4601362/DSC_2057.JPG]
[url=http://www.upload.ee/image/4601363/DSC_2055.JPG]
[url=http://www.upload.ee/image/4601367/IMG_20150329_161114.jpg]
[url=http://www.upload.ee/image/4601366/IMG_20150329_161126.jpg]
The first order was the fluid changes – did them all. After couple of days I noticed a differential fluid leaking from the real axles, so I had to change the axle seals.
So far I have also changed:
*new rims and summer tires
*PCV hoses
*tranny and transfer case seals
[url=http://www.upload.ee/image/4767625/IMG_20150603_151536.jpg]
[url=http://www.upload.ee/image/4767626/IMG_20150606_153218.jpg]
*soldered the VIC to get rid of the false messages and connecting the radio and speakers correctly
*new brake pads and rotors to the front
*new handbrake shoes and springs etc – the “old” view
[url=http://www.upload.ee/image/4712168/IMG_20150507_153532.jpg]
*new CV boots
*water pump
*new A/C pump and system fill – the old had a bad piston lock up, I think from running the pump dry of oil
[url=http://www.upload.ee/image/4805938/IMG_20150626_132559.jpg]
A little offroad with my street tires :cheer:
[url=http://www.upload.ee/image/4699917/IMG-20150501-WA0000.jpg]
[url=http://www.upload.ee/image/4699926/IMG_20150501_180055.jpg]
[url=http://www.upload.ee/image/4699914/IMG_20150501_180047.jpg]
Now I just have to give her a 3´ lift, 242 transfer case and some bogger tires B)
Also the rear diff is making some whining noise so I think that´s the one thing I have to let professionals to fix. Really like to work with this car, so simple you just need a big hammer and a brakerbar to get thing off/on 🙂
Any advise for the car would be grate 🙂
-
Replies
-
Rear trackbar bushings replaced:
[url=https://www.upload.ee/image/7311067/20170729_151632.jpg]
[url=https://www.upload.ee/image/7311068/20170729_154847.jpg]
[url=https://www.upload.ee/image/7311069/20170729_154853.jpg]
Friend made me a new plenum plate to replace the factory crap:
[url=https://www.upload.ee/image/7410428/20170831_171621.jpg]
[url=https://www.upload.ee/image/7410430/20170831_172217.jpg]
[url=https://www.upload.ee/image/7410432/20170831_172438.jpg]
[url=https://www.upload.ee/image/7410433/20170831_190229.jpg]
Testing on spare intake:
[url=https://www.upload.ee/image/7410434/20170831_192237.jpg]
Plastic removed and found some rust:
[url=https://www.upload.ee/image/7467110/20170808_175104.jpg]
[url=https://www.upload.ee/image/7467111/20170808_175113.jpg]
Some cutting and new metal 120x60x4(mm) + some paint etc.
[url=https://www.upload.ee/image/7467115/IMG_20170907_142026.jpg]
[url=https://www.upload.ee/image/7467118/20170917_140145.jpg]
[url=https://www.upload.ee/image/7467119/20170917_140213.jpg]
And some fun also:laugh2:
[url=https://www.upload.ee/image/7467149/20170914_135214.jpg]
Driver door pins are now replaced.
Old:
[url=https://www.upload.ee/image/7518334/20170930_125825.jpg]
New:
[url=https://www.upload.ee/image/7518333/20170930_125822.jpg]
So I had some exhaust smell in, when driving with an open window. The solution was to install manifold gaskets that factory idiots never did.
I also had some painted manifolds on my spare engine, so they where changed.
[url=https://www.upload.ee/image/7535150/20171006_174151.jpg]
[url=https://www.upload.ee/image/7535149/20171006_174137.jpg]
[url=https://www.upload.ee/image/7535151/20171007_145038.jpg]
Number 3,5 and 8 where leaking.
[url=https://www.upload.ee/image/7535153/20171007_145831.jpg]
[url=https://www.upload.ee/image/7535154/20171007_145902.jpg]
Rear bumper waits for install:
[url=https://www.upload.ee/image/7655182/20171111_151736.jpg]
[url=https://www.upload.ee/image/7655183/20171111_151756.jpg]
[url=https://www.upload.ee/image/7655184/20171111_151746.jpg]
New rear main seal was installed, with new pan seal etc.
[url=https://www.upload.ee/image/7803481/20171221_182420.jpg]
The real main seal was not offset in the bearing cap, and the oil pan seal was heavy with RTV, so thats why it leaked.
I hope I did some better job.
Engine mounts where shot.
Right side:
[url=https://www.upload.ee/image/7889963/20180114_135726.jpg]
Left side:
[url=https://www.upload.ee/image/7889959/20180114_125254.jpg]
[url=https://www.upload.ee/image/7889958/20180114_125240.jpg]
Left side bracket is wrong size – too wide to fit the engine block, so I pressed the bushing out from the new and replaced it with the old.
[url=https://www.upload.ee/image/7889961/20180114_132608.jpg]
[url=https://www.upload.ee/image/7889962/20180114_132618.jpg]
After the lift, the rear axel was still too close to the body, so I put a set of JK rear upper CA on, to get the axel more center,
[url=https://www.upload.ee/image/8137542/20180219_135801.jpg]
[url=https://www.upload.ee/image/8137537/20180305_180452.jpg]
[url=https://www.upload.ee/image/8137539/20180305_190032.jpg]
Also waiting the trackbar brackets to center the axels.
[url=https://www.upload.ee/image/8137554/20180228_120223.jpg]
Also new trunk “bushings”:
[url=https://www.upload.ee/image/8137555/20180228_135427.jpg]
Had a coolant leak this morning:|
Yes- it was this stupid little hose between the block and the pump. I did not replaced it when I did the water pump 2.5 years ago. Now I know better.
Old vs new:
[url=https://www.upload.ee/image/8146337/20180307_172523.jpg]
[url=https://www.upload.ee/image/8146336/20180307_173024.jpg]
[url=https://www.upload.ee/image/8146338/20180307_174740.jpg]
More work done:
* New bump stops in the rear
[url=https://www.upload.ee/image/8326597/20180409_172237.jpg]
* New wires etc
[url=https://www.upload.ee/image/8326602/20180408_160215.jpg]
* New hoses to the tranny cooler
[url=https://www.upload.ee/image/8326610/20180413_182147.jpg]
* One more cooler in the front for the power steering fluid
[url=https://www.upload.ee/image/8326614/20180409_210132.jpg]
[url=https://www.upload.ee/image/8326615/20180413_191435.jpg]
Double cardan rebuild:
[url=https://www.upload.ee/image/8365434/20180416_172043.jpg]
[url=https://www.upload.ee/image/8365436/20180416_205719.jpg]
[url=https://www.upload.ee/image/8365404/20180420_175314.jpg]
[url=https://www.upload.ee/image/8365406/20180420_175911.jpg]
[url=https://www.upload.ee/image/8365403/20180420_183438.jpg]
- You must be logged in to reply to this topic.