Menu

95 Honda Accord ABS light

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 95 Honda Accord ABS light

  • Creator
    Topic
  • July 27, 2015 at 5:52 pm #835677
    Ted LemieuxTed Lemieux
    Participant

      I have a 1995 Honda Accord with a ABS light that remains on most of the time. I accessed the blue diagnostic port under the glove box and read the code. I’m getting code 27 which is a Right hand rear inlet, hydraulic modulator solenoid valve. Anybody have any ideas on where to go next?

    • Creator
      Topic
    Viewing 2 replies - 1 through 2 (of 2 total)
    • Author
      Replies
    • July 27, 2015 at 7:11 pm #835689
      ChrisChris
      Participant

        Here is a quote from this website: http://www.aa1car.com/library/abs_honda.htm

        [quote=aa1car]If you find a code for a ABS solenoid valve, the resistance between the solenoid terminals can be checked with an ohmmeter. As a rule, you should see about one to three ohms if the solenoid is good. A zero reading would tell you the solenoid is shorted, while an infinite reading would tell you it is open. If a solenoid is bad, the entire ABS modulator unit has to be replaced (list price $927) because the individual solenoids are not available as separate components.[/quote]

        This information could be incorrect, but it is what my quick search wielded .

        July 27, 2015 at 7:44 pm #835693
        Ted LemieuxTed Lemieux
        Participant

          Thanks!! That’s kind of what I was afraid of. That light may stay on for a long time.

        • Author
          Replies
        Viewing 2 replies - 1 through 2 (of 2 total)
        • You must be logged in to reply to this topic.
        Loading…
        toto togel situs toto situs toto