Menu

94 Chev Suburban C1500 Engine Oil Cooler Lines

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 94 Chev Suburban C1500 Engine Oil Cooler Lines

  • Creator
    Topic
  • January 23, 2015 at 9:51 pm #653351
    popoftenpopoften
    Participant

      Hi Guys, I need to replace the leaky engine oil cooler lines on my truck. I know I need to disconnect the lines from the radiator, and I know I need to unbolt where they are bracketed to the side of the engine. I am just a little stumped as to how the quick-release plastic things are supposed to be released where they connect to the oil filter adapter housing. Any guidance would be appreciated ! Thanks, Pop

    • Creator
      Topic
    Viewing 3 replies - 1 through 3 (of 3 total)
    • Author
      Replies
    • January 23, 2015 at 10:08 pm #653352
      popoftenpopoften
      Participant

        Here is a pic of the clips I don’t know what to do with.

        Attachments:
        January 24, 2015 at 3:00 am #653379
        Jim DavisJim Davis
        Participant

          They may be gummed up/dirty, so take some brake cleaner and squirt in them. Then squeeze the tabs as you push IN on the lines, then pull them out as you hold the tabs down. If they are brittle they may break, but you can get new ones at any auto supply.

          January 24, 2015 at 5:55 pm #653423
          popoftenpopoften
          Participant

            Will give this a try! Thanks!

          • Author
            Replies
          Viewing 3 replies - 1 through 3 (of 3 total)
          • You must be logged in to reply to this topic.
          Loading…
          toto togel situs toto situs toto