Menu

92 Accord Stall w no CEL

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 92 Accord Stall w no CEL

  • Creator
    Topic
  • July 20, 2012 at 11:00 am #459731
    Trcustoms719Trcustoms719
    Participant

      Did you replace the ICM with a OEM honda unit?_x000D_

    • Creator
      Topic
    Viewing 9 replies - 1 through 9 (of 9 total)
    • Author
      Replies
    • July 20, 2012 at 11:00 am #459732
      mirahamiraha
      Participant

        no … O’Reilly aftmkt_x000D_
        _x000D_
        btw forgot to mention I did get a code 15 on the pax floor panel … Igntiion output signal … before replacing ICM

        July 20, 2012 at 11:00 am #459733
        Trcustoms719Trcustoms719
        Participant

          Did you change any of the hardware

          July 20, 2012 at 11:00 am #459734
          MattMatt
          Participant

            So, you are getting a signal in, and nothing out of the ICM when the problem occurs?

            July 21, 2012 at 11:00 am #459735
            college mancollege man
            Moderator

              since its ignition signal lost. Try wiggling the ignition_x000D_
              key and cylinder while the car is running. You may have_x000D_
              a problem with the electrical portion of the ignition switch._x000D_
              if the the car does indeed stall.replace just the electrical_x000D_
              portion of the

              July 21, 2012 at 11:00 am #459736
              mirahamiraha
              Participant

                Thanks guys … great ideas … I’ll let you know what works.

                July 23, 2012 at 11:00 am #459737
                EricTheCarGuy 1EricTheCarGuy
                Keymaster

                  Do you have an aftermarket distributor installed?

                  September 25, 2012 at 10:08 pm #465306
                  mirahamiraha
                  Participant

                    Replaced w Honda distributor cap and plug wires.

                    After making sure ICM terminals were snug, no problems.

                    September 25, 2012 at 10:09 pm #465307
                    mirahamiraha
                    Participant

                      After making sure ICM terminals were snug, no problems. Thanks to all.

                      September 25, 2012 at 11:03 pm #465314
                      college mancollege man
                      Moderator

                        Thanks for the update.

                      • Author
                        Replies
                      Viewing 9 replies - 1 through 9 (of 9 total)
                      • You must be logged in to reply to this topic.
                      Loading…
                      toto togel situs toto situs toto