Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 87 jeep cherokee boilover
- This topic has 14 replies, 7 voices, and was last updated 12 years, 8 months ago by
EricTheCarGuy.
- CreatorTopic
- June 23, 2012 at 11:00 am #459637
That is normally a
- CreatorTopic
- AuthorReplies
- June 23, 2012 at 11:00 am #459641
Quoted From krycus21: _x000D_
_x000D_
no smoke what so ever, oil looks clean no milky-ness_x000D_
_x000D_
ok.. Try doing a pressure test on the cooling system to see if it holds pressure._x000D_
When is the last time it has a thermostat put in it?_x000D_
They are cheaJune 23, 2012 at 11:00 am #459642i dont have a adaptor piece
June 23, 2012 at 11:00 am #459643I doubt it’s the reservoir, but a bad radiator cap is a definite possibility (hopefully so). If the cap can’t hold the pressure, the radiator can’t pressurize when it heats. It boils over, but doesn’t oveheat beyond 212 def F because the energy is absorbe
June 23, 2012 at 11:00 am #459644[quote]Quoted From spelunkerd:_x000D_
_x000D_
I doubt it’s the reservoir, but a bad radiator cap is a definite possibility (hopefully so). If the cap can’t hold the pressure, the radiator can’t pressurize when it heats. It boils over, but doesn’t oveheat beyonJune 23, 2012 at 11:00 am #459638I already did the block tester, everything was fine, my brother works at a auto part store i had him order me a new reservoir ($20) im just asking in case it does not work. it also sat for about a year and a half. it did not do this when i parked it. 
June 23, 2012 at 11:00 am #459639[quote]Quoted From krycus21: _x000D_
_x000D_
I already did the block tester, everything was fine, my brother works at a auto part store i had him order me a new reservoir ($20) im just asking in case it does not work. it also sat for about a year and a half. iJune 23, 2012 at 11:00 am #459640no smoke what so ever, oil looks clean no milky-ness
June 24, 2012 at 11:00 am #459645If the cap can’t be tightened. Then i can see why your boiling over._x000D_
pressure controls temperature. when you install the new reservoir_x000D_
be sure to top off the coolant and bleed any air. keep us posted_x000D_
_x000D_
http://www.youtube.com/watch?v=zUpXgAJ1gjUJune 24, 2012 at 11:00 am #459646I worked on a 93
June 25, 2012 at 11:00 am #459647The #1 cause of a symptom like that would be air in the cooling system and that’s where I recommend you start.
June 25, 2012 at 11:00 am #459648i just replaced the reservoir today, does not boil over anymore, thanks for your help guys_x000D_
~cody~June 25, 2012 at 11:00 am #459649thanks for the update and the fix
June 25, 2012 at 11:00 am #459650Well done sir!
June 27, 2012 at 11:00 am #459651Nice work thanks for keeping us up to date and for using the ETCG forum.
- AuthorReplies
- You must be logged in to reply to this topic.