2010 Civic Drivers Power Window

I’ve got a 2010 Civic where all of the windows work except the drivers window.

Took the door panel apart & figured out the two wires that acutally are for the motor not the auto up/down sensors. Put 12v on it both ways. It doesn’t go up or down.

Replaced motor and track assembly with one from autozone. I tested it before i put it in the door panel. Tested it again all is good by applying 12v i can make it go up and down.

The problem is that is still will not work with the switch.

Bought cheep switch replacement on ebay it says compatible with honda (35750-SNA-S130-M1). Still doesn’t work.

I don’t have a wiring diagram for this car so i’m flying blind on this one. The diagrams you find by a quick google search are NOT what is in the car.

This switch has the auto up/down on it so i did the reset procedure, but that is supposed to be for the auto up/down. I’d be happy with up/down with holding the switch.

Any thoughts before dropping $80-$100 on a switch from honda?