- This topic has 2 replies, 2 voices, and was last updated 9 years, 12 months ago by .
-
Topic
-
Driver said car was working fine, when he put car in gear from park, car stalled and then wouldn’t crank.
- no DTCs
- verified that starter turns engine over by jumping it from the starter relay
- pulled out ecm and verified that the transmission range switch is functioning
- ignition switch checks out
For some reason, the starter relay is not getting its 12 volt signal from the ECM to energize the relay, even though the park/neutral signal is giving the green light (goes to low signal)
Been at this all day and still have a car dead in the water..be glad for any suggestions.
- You must be logged in to reply to this topic.