Menu

2007 crown Vic Police Interceptor Cat Heat Shield

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here 2007 crown Vic Police Interceptor Cat Heat Shield

  • Creator
    Topic
  • #610511
    David BergerDavid Berger
    Participant

      Driver side cat Heat shield rattles while accelerating.
      What size worm clamp would I need?
      Would I be able to add this clamp without removing the old one?
      Thanx

    Viewing 2 replies - 1 through 2 (of 2 total)
    • Author
      Replies
    • #610515
      george gonzalezgeorge gonzalez
      Participant

        Quite often it rusts out at a place where a clamp won’t fit.

        You might just drive up to a muffler place. Many of them will weld it back into place for just a few bucks. It just takes a minute to raise the car up and arc weld a few spots.

        Just don’t let them upsell you into new brakes, exhaust, ball-joints and an oil-change too.

        #610558
        college mancollege man
        Moderator

          Put a piece of wire or string around it then measure it.
          home depot or lowes will have the clamp size you need. plumbing
          or hvac section. either 6″or 8″ i’m guessing.

        Viewing 2 replies - 1 through 2 (of 2 total)
        • You must be logged in to reply to this topic.
        Loading…
        toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
        situs toto situs toto