- This topic has 6 replies, 2 voices, and was last updated 6 years, 4 months ago by
.
-
Topic
-
Hello- I have a 2004 saab 95 arc. I’m replacing the blower motor or resistor. I have everything disasembled. The connector to the motor is the only thing I have to go in order to remove the motor. The problem I’m having is I can’t disconnect the electrical connector to the motor. I really don’t want to destroy this connector. Does anybody have a clue on disconnecting this connector?
-
Replies
-
If so, you’ll need to remove the lower dash board cover that is just below the blower motor
You can see the mounting holes that secure the unit in place (marked in red) see below.
If the second connector is what your describing ( orange arrow ) it appears to be a simple squeeze to unlock setup.
Thanks again. Those horizonal marks were the pry points. Took my angle nose plyers and it just came off. In the past I have had problems with some of these electrical connections breaking. Fragile from age? Just paranoid with breaking another. I try to use extreme caution with any connections. Wish I could buy you a beer or steak dinner. Thanks.
- You must be logged in to reply to this topic.