- This topic has 5 replies, 4 voices, and was last updated 11 years, 4 months ago by
.
-
Topic
-
-
Replies
-
Yeah….You could reprogram it with a Tech II scan tool but you would need to be affiliated with GM or AC Delco. Unless you can find a shop that has the means you’re stuck with the Dealer.
I could do it for you but chances are you wouldn’t want to drive that far.
Very much appreciated. B) …. so none of the controls on the driver side door work as well the passenger side … but the rear windows work. Is the most common culprit the ddm? Or could it also just be the switches? How do I test?
I have dvom and power probe.The rear windows work only by their own switches. Not the master switch. I took a look at it and I have battery voltage going to the ddm. But when I used the power probe to get the window down it didn’t go down. Don’t know if I’m doing the test correctly. Five plugs in the ddm. I chose the four pin connector coming from the bottom of the door panel. Hooked up my power probe to the battery. Connected the ground lead to the black wire and the probe to the orange wire. Nothing happened when I flipped the switch. Soooo confused. Any help would be amazing.
here is a link for a wiring diagram.
- You must be logged in to reply to this topic.