2003 Honda CRV shaking while accellerating

This topic has 5 replies, 6 voices, and was last updated 11 years, 9 months ago by EricTheCarGuy.

Creator

Topic
January 22, 2013 at 5:05 pm #493751
Brad Barker
Participant
Not sure what is causing it. It seems to shake the worse when I am accelerating going up a hill. Usually between 40mph ~ 60mph. I will make a video and post it on YouTube if that would be helpful…
Creator

Topic

Viewing 5 replies - 1 through 5 (of 5 total)

Author

Replies
January 22, 2013 at 8:19 pm #493762
Joe
Participant
Bad driveshaft u-joints.
February 13, 2013 at 9:35 pm #500187
Mike
Participant
The most likely cause is either non balanced tire or the tire is separating. My money is on the balance. I used to work for a tire store and that was usually the cause. It is fairly cheap to have corrected too. Those lead weights come off all the time.
February 14, 2013 at 1:06 am #500217
mkc
Participant
+1 on the driveshaft. My accord started doing the same thing after replacing one of the original half shafts with an aftermarket part.
March 24, 2013 at 1:06 pm #509044
Richard Pico
Participant
That sounds like motor mount failure, in my opinion. Tranny mount failure…!?
April 2, 2013 at 1:02 am #510868
EricTheCarGuy
Keymaster
If it’s shaking under acceleration I’d check the ignition system. Ignition problems often show up under load as a vibration during acceleration. Make sure you’re using either NGK or Nippon Denso plugs. You might also want to do a power balance test to see if you have a problem cylinder(s).
Author

Replies

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Loading…

toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/

situs toto situs toto