2003 Concord Front End Rattle

This topic has 5 replies, 3 voices, and was last updated 8 years, 2 months ago by Larry Johnson.

Creator

Topic
October 19, 2016 at 8:10 pm #870494
Larry Johnson
Participant
I just watched Eric’s video Replacing Stabilizer Bars. I just wanted to know if this my problem also.
I here a rattling noise in the front end while I driving, not while turning. Dodge call the bars Control Arm
(Left & Right).
Attachments:
- ConcordeControlArm.jpg
Creator

Topic

Viewing 5 replies - 1 through 5 (of 5 total)

Author

Replies
October 19, 2016 at 8:54 pm #870499
Andrew Harris
Participant
There is a number of things that can cause a rattle in the front end. Stabilizer end links are a very common problem but are not the only thing that can cause a rattle.
October 19, 2016 at 9:20 pm #870501
Ty
Participant
+1 Stabilizer Bar Link or sway bar links there sometimes called are the most common rattling part on these cars.
October 19, 2016 at 10:06 pm #870503
Larry Johnson
Participant
Let me check and see if I have the ones that need to be greased. When I look up the part at the
parts store I see grease fitting on each end.
October 19, 2016 at 10:13 pm #870504
Ty
Participant
If there the factory links they wont have zerk fitting and if the rattling around there done for.
October 24, 2016 at 8:19 pm #870731
Larry Johnson
Participant
🙂 I installed the Stabilizer Bars on the Concorde. The only problem that I had was removing the nuts. I had to cut
the nuts off, but after that the installation went well.
Author

Replies

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Loading…

toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/

situs toto situs toto