- This topic has 2 replies, 2 voices, and was last updated 11 years, 2 months ago by
.
-
Topic
-
I have been having an issue with a vibration in my brake pedal at a stop in idle in drive and reverse. i have replaced the front tranny mount and the passenger side mount as well. ( i used autozone duralast brand). the front mount will still move at 1.5 inches i have warrantied the front mount already and no difference and same amount of movement. I have checked all the other mounts for movement and have seen nothing other than the front mount. I have also tried cutting off vacuum to the booster to see if it was vacuum pulsation from engine and is not the case. should i buy a stock front tranny mount? Who makes a good brand of motor mount? this Vibration drives my feet crazy especially when sweaty and i have to put the car in neutral. Other wise i love my bonneville best car i’ve ever owned, this brake pedal is my only pet peev.
Thanks in advance. 🙂
Ps i will post a video soon showing the amount of engine movement.
PPs I have also checked the harmonic balancer and it is fine.
-
Replies
-
I have experience this problem at times in the shop. Install an aftermarket motor mount. Ether vibration stays the same or gets worst. So I go back to the service writer. To tell him, the shop going spend a few extra bucks to get factory motor mounts. Hay I think certain aftermarket parts are great. But when it comes to motor mounts, I try to get factory.
- You must be logged in to reply to this topic.