- This topic has 6 replies, 5 voices, and was last updated 12 years, 6 months ago by
.
-
Topic
-
EX model 2.3L I4 w/manual transmission I noted when trying to set the cruise control the cruise main switch lights up but when setting the speed nothing happens. This problem started after I replaced the brake lamp switch. The switch a genuine Honda switch. The reason for replacing the brake lamp switch was due to the absents of all brake lights when the brake pedal is pushed in. It looks like the switch is adjustable. I checked the fuse, fuse is good. I also checked the vacuum reservoir and actuator diaphragm both held vacuum. Does any one have any advise? Thanks.
-
Replies
-
The brake light switch is probably adjusted to close to the pedal. I’m pretty sure Eric did a video on this. Lemme look around for ya.
http://www.youtube.com/watch?v=Nuj9o6YdO8A
Bam, there ya go. Good luck bud.
If the problem started when the switch was replaced then thats
where to start. If the switch is misadjusted it will cancel the cruise.
There should be vacuum lines to the cruise unit. follow them to and
from to make sure no breakage. also does the button and cluster
light come on?This should help
http://bbbind.com/tech_database.html
For system, click Engine. For subsystem, click Speed control.
Thanks for all your help, the links provided were a great visual aid. I did find that the brake lamp switch was misadjusted. I corrected the fault. I was able to get the cruise control to work again. Thanks again
- You must be logged in to reply to this topic.