- This topic has 9 replies, 4 voices, and was last updated 8 years, 6 months ago by
.
- Topic
- Replies
Is the car warn when it won’t start? I used to have a 66 mustang that wouldn’t start because the starter was getting blasted by heat from the exhaust manifold
I have tried that still doesn’t start and I know it has no spark I replaced crank an cam sensors no difference also i think It has no injector pulse
Starter is good it cranks I have no spark and fuel injectors don’t work but then it starts when it wants to lol and I have no security light
Security light check good. On then off normal operation correct?
Ever have check engine light or scanned for error codes.If you have no cam/crank sensors/circuit error codes then likely problem originating in security system since light indicates an error.
Suggest go thru the pass-lock security setup sequence, sorry don’t have the procedure, or disconnect battery for a while to see if resetting control module has an effect.check your fuses and relays mannly to the pcm… but I would check all the fuses both in the cab and under the hud….did you verify that there is no power going to the injectors??? because if your getting no signal to the injectors and no spark… your computer is not sending signal most of the time not getting data from the cam and crank sensor,,, I would check the wireing and check a wireing diagram and see if that shows anything
- You must be logged in to reply to this topic.