- This topic has 14 replies, 2 voices, and was last updated 6 years, 11 months ago by
.
-
Topic
-
Hello i have 2001 pontiac grand am se . the stock stereo was on its last leg but still worked. I pulled it out to put in a after market and it wont even come on ( same for 5 different decks ). I have noticed that after removing the stock deck there is no more door chime . am i missing somthing ? I also checked for shorts.
-
Replies
-
The door chimes are produced from the radio.
Not knowing what head unit you purchased or adapter harness used.
This shows what wires do what.2001 Pontiac Grand Am Car Audio Wiring Diagram
[color=orange]Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: The radio harness does not provide a switched power source. Run a wire to the fusebox for switched power.
Car Radio Ground Wire: Black/White
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: Pink
Car Stereo Amplifier Location: Mounted behind trim in the left side of the trunk.
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue[/color]Not knowing the specifics for a aftermarket head unit and adapter harness for your vehicle.
My first thought is that a GM Raptor adapter kit isn’t compatible to a 2001 Pontiac grand am se
Which may well be part or the whole of your issue(s)Okay as a test I have took the power wire for the dimmer and turned on my lights to see if we power up the radio and the radio powered up and made sound and everything so I’m wondering if it could just be missing the part for the chime .
I couldn’t say for certain if the replacement head unit has the chime function.
You would need to research the specs on the unit.This is me after getting power from dimmer wire .https://youtu.be/H8IeLOLOw-M
Interesting, but not all too surprising.
I would be curious if that would trip error code on the ECM.Never thought of it setting a code . i do have a code reader and will hook it up to see if it sets one
That’s the same video I used to wire it . It’s all done wright . I think the pcm turns off the account power wire when it don’t detect the chime the stock radio had.
- You must be logged in to reply to this topic.