- This topic has 2 replies, 3 voices, and was last updated 10 years, 7 months ago by
.
-
Topic
-
ok folks, just spent most of the day replacing parking brake shoes, in my piece of Sh–
I did this because it does not hold the vehicle at 1200 rpms as required for inspection
The shoes looked just as good as the new one, there is no oil on them but I did clean everything
with brake clean I had tried before to adjust them as per the manual..and now them seem to be worse.
WTF….Any one else had this issue, I mean parking broake is not rocket sience ..needless to say I am not a happy camper , dirty yes but not happy what a way to spend memorial dayby the way rotors and pads are new a year ago
Viewing 2 replies - 1 through 2 (of 2 total)
-
Replies
-
see if this helps. You should be able to pull the rear
plugs and adjust the adjuster up to cause a slight drag
when the wheel is turned.
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.