- This topic has 3 replies, 2 voices, and was last updated 9 years, 9 months ago by
.
-
Topic
-
Ok so i bought this durango i love it its clean its awesome and powerful anywho I noticed a hissing noise and its very annoying at times and it kinda comes and goes (or i just dont notice it some times) and i have not really been able to pin point as to what causes it to start doing it at all its pretty random.. it seems as if its comeing from the passenger side in the cab? Any suggestions as to what it could be? Also on another note my hvac nob (controls where the air comes out at ( defrost, feet, front ext.)) Only works on front blowing at me no matter the position it is in. I have removed the whole unit and it all seems fine also decided to dismatle it and see whats inside lol bad idea dont do that haha ive kinda ran over some lines under steering column (yellow and blue) but thats as far as ive went.. no time or really want to do more but i need it fixed cuz it takes like 20 mins to defog windsheild when its blowing in opposite direction lol but i assume this hissing noise has to do with that not working any insight besides rip it apart and look for a possible culprite. Thanks 🙂 sorry for such long post lol
-
Replies
-
Also when the hiss starts making it self known it will hiss for 3 or so seconds and stop for 3 or so and hiss agian.. heat blows hot.. ac blows luke warm.. the compressor doesnt spin even if its on max ac knob turned full blue
Now heres my problem agian here is 1 the hissing and two i hear tge vaccum change when i change the knob.. so if very well could be the acuators but there is no way i have found to check if its the knob or not (cant remove lines from rubber gromit thing on back of “knob housing” and that it doest explain the odd hissing… also something i noticed also was the idle moves constantly nothing you can hear or feel just see in the rpms and its not much but man that needle has a case of adhd.. just a note for someone who more than likly say moving idle possible cause be igniton realated… i did the plugs, wires, cap, rotor, and air filter so i dought it Thanks in advace for any answers and that thank you collage man (i think thats your name lol)
- You must be logged in to reply to this topic.