Menu

2000 Acura RL Heated seats

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here 2000 Acura RL Heated seats

  • Creator
    Topic
  • #636991
    Noah DaltonNoah Dalton
    Participant

      I have a 2000 Acura RL with about 148000 on it and the heated seats stopped working. I checked all the fuses that pertain to the heated seats circuit (19 and 5) and they were both fine. I am now suspecting it is the relay, but i cant seem to find it on either fuse box. any suggestions?
      Wiring diagram is attached

      Attachments:
    Viewing 11 replies - 1 through 11 (of 11 total)
    • Author
      Replies
    • #637004
      ErinErin
      Participant

        See if the relay is under the driver’s seat. If it is anything like my 97 Acura CL, which is where it is, some big ol orange thing.

        Just with the cab nice and quiet, hit each switch a few times and listen for clicking of the relay. Don;t mistake the click with the switch noise.

        #637128
        Noah DaltonNoah Dalton
        Participant

          Thanks for the tip, I’ll give it a look tomorrow. Also forgot to mention that the switch doesn’t light up when the switch is engaged, which leads me to to believe that power isn’t getting to the switch. Could a bad relay still cause this?

          #637136
          ErinErin
          Participant

            I do not know much about the seat heater. Only reason I know where relay is, it’s cause I had to remove my seat and adjust it manually due to a motor being bad.

            Beside the point but to me, the seat heating up is a very creepy feeling.

            #637383
            Noah DaltonNoah Dalton
            Participant

              Took a look under the seats today and didn’t see it. Tommorow I’m just gonna commit and search the car until i find it. lol

              BTW, heated seats don’t feel nearly as creepy as ventilated seats. :unsure:

              #637763
              EricTheCarGuy 1EricTheCarGuy
              Keymaster

                It’s not very likely to be a relay problem. It’s more likely the elements went out. That happens after a while. There not that difficult to replace however you need to remove the upholstery in order to access them. It’s fiddly and time consuming but not impossible. I’ve been wanting to get one of these in to do a video on.

                #637773
                Noah DaltonNoah Dalton
                Participant

                  lol If i was only a bit closer i’d definitely bring it to you to make a video. Although i dont think it would be the elements since they both went out at once and the switches arn’t lighting up

                  #637864
                  EricTheCarGuy 1EricTheCarGuy
                  Keymaster

                    I see your point. If that’s the case then I would be checking for power and ground at the switches. If you don’t have it then I would look to what is suppose to power them up. For that a wiring diagram would be your best friend.

                    http://www.ericthecarguy.com/faq/solving-automotive-electrical-problems

                    #638151
                    Michael SacksteinMichael Sackstein
                    Participant

                      you still could have a problem with the heating elements underneath the seats. but also it could be that the switch light has gone out. you may consider doing some further diagnosing before you disassemble the upholstery and replace those bad boys. maybe make a video of the problem and upload it onto here, that way we can see what’s going on. replacing those things is not easy or cheap. I had to do it last year on my 2006 Honda Pilot Ex, and I do not wanna do it again. It was a real PITA.

                      Another thing, if you have heated seats in your car don’t climb over the seats with your knees. It’s very easy to do if you’re reaching into the car to get something you forgot or whatever. But when you do that it causes the heating element wires to break, and if you have to disassemble the seat to replace that you’ll see burn marks from the heating element where it burned out.

                      #638449
                      Noah DaltonNoah Dalton
                      Participant

                        Thanks so much for the tips I’m just gonna test everywhere until i can pinpoint the issue.

                        #638454
                        Ruben FloresRuben Flores
                        Participant

                          Commons items are power, ground, ignition switch, and relay.
                          Do you have a volt/ohm meter for troubleshooting help.
                          If so, remove fuse 5 and ohm out fuse. Then check for power at fuse 5 socket. Reinstall fuse
                          If good, then remove fuse 19 and ohm out fuse. Check for power at fuse 19 socket with key in and
                          ignition switch in ON position. Reinstall fuse.
                          If good, now need to check input/output to relay contact and coil.
                          Don’t know were the location of heater relay is.

                          #638532
                          EricTheCarGuy 1EricTheCarGuy
                          Keymaster

                            I would start by checking if the switches have power coming into them. If not, then I would trace down where the power comes from. If the fuses are good as you say, then the issue would be between the fuse box and the switches.

                          Viewing 11 replies - 1 through 11 (of 11 total)
                          • You must be logged in to reply to this topic.
                          Loading…