Menu

2000 Acura Maintenance Required light won’t reset

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here 2000 Acura Maintenance Required light won’t reset

  • Creator
    Topic
  • #524564
    Monte HylerMonte Hyler
    Participant

      The Maintenance Required light will not reset on a 2000 Acura TL we just bought. I tried the two button method in the manual but no luck. Any help would be appreciated! Thanks

    Viewing 12 replies - 1 through 12 (of 12 total)
    • Author
      Replies
    • #524618
      college mancollege man
      Moderator

        see if this helps.

        #524691
        Monte HylerMonte Hyler
        Participant

          Thanks. This is the procedure that is detailed in the manual and I believe I followed it correctly. But, in listening to the audio, it sounds like the buttons made a noise when he pressed them. Are they supposed to make a latching sound like that? I’ll try this again tomorrow. Thank you again for helping us.

          #524896
          college mancollege man
          Moderator

            should just press in. keep us posted. 🙂

            #525077
            Monte HylerMonte Hyler
            Participant

              No luck! I am sure I followed the procedure exactly but the light still would not reset. WIth the key off, I pushed both buttons in, turned the key on and I held the buttons in for at least 30 seconds and probably closer to a minute. The light flashed once but then stayed on. Any other ideas? I am wondering if maybe one of the buttons isn’t working. Any way to test their functions without taking a lot of stuff apart? I don’t have a wiring diagram for the car yet but I do have a repair manual on order. Thanks again!

              #525088
              freefalconfreefalcon
              Participant

                The service manual says for that model after turning the ignition switch on, if your holding the reset buttons, the light should flash 10 times then go out. If it isn’t doing anything then there may be a problem with the circuit perhaps.

                #525120
                college mancollege man
                Moderator

                  [quote=”Monte” post=62639]No luck! I am sure I followed the procedure exactly but the light still would not reset. WIth the key off, I pushed both buttons in, turned the key on and I held the buttons in for at least 30 seconds and probably closer to a minute. The light flashed once but then stayed on. Any other ideas? I am wondering if maybe one of the buttons isn’t working. Any way to test their functions without taking a lot of stuff apart? I don’t have a wiring diagram for the car yet but I do have a repair manual on order. Thanks again![/quote]

                  You may have a switch problem. keep us posted. 😉

                  #525161
                  Monte HylerMonte Hyler
                  Participant

                    thanks. Do you happen to know where I can get a copy of the wiring diagram for this car on the internet? Hopefully for free? I have a repair manual on order but that will probably take while to get here.

                    #525199
                    college mancollege man
                    Moderator

                      [quote=”Monte” post=62677]thanks. Do you happen to know where I can get a copy of the wiring diagram for this car on the internet? Hopefully for free? I have a repair manual on order but that will probably take while to get here.[/quote]

                      Here is a sight for a wiring diagram.

                      http://www.bbbind.com/

                      #525232
                      Monte HylerMonte Hyler
                      Participant

                        I checked that site but I don’t see a diagram covering this particular area. Looks like I’ll have to wait until the manual I ordered shows up. Thanks!

                        #525286
                        freefalconfreefalcon
                        Participant

                          Will this work for you?

                          Attachments:
                          #525426
                          Monte HylerMonte Hyler
                          Participant

                            It just might! I’ll check it out! Thanks!

                            #525436
                            college mancollege man
                            Moderator

                              [quote=”Monte” post=62838]It just might! I’ll check it out! Thanks![/quote]

                              Great diagram. 🙂 what you could do is ohm out the switches.
                              disconnect the negative cable.

                            Viewing 12 replies - 1 through 12 (of 12 total)
                            • You must be logged in to reply to this topic.
                            Loading…
                            toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
                            situs toto situs toto