1999 nissan altima intake manifold

This topic has 5 replies, 4 voices, and was last updated 7 years, 10 months ago by Jim.

Creator

Topic
December 21, 2013 at 2:27 am #570604
Mitch
Participant
I am working on a 99 altima replacing intake manifold took the old one out and put the new one in but is one bolt hard to get to any idea what tools i can use like special wrench or anything
Creator

Topic

Viewing 5 replies - 1 through 5 (of 5 total)

Author

Replies
December 21, 2013 at 2:45 am #570617
college man
Moderator
see if this helps.
December 21, 2013 at 2:48 am #570621
college man
Moderator
This to.start at em-9

http://www.nicoclub.com/FSM/Altima/1999/em.pdf
December 21, 2013 at 2:59 am #570630
Mitch
Participant
I’ve seen the video what kind of wrench is eric using ?
December 21, 2013 at 3:18 am #570647
EricTheCarGuy
Keymaster
It’s a 1/4″ in ratchet with a 12mm swivel socket. Good luck.
April 8, 2017 at 7:09 pm #878930
Jim
Participant
Try a half moon box wrench (aka obstruction wrench).

That area is really cramped, I was able to do it using a combination wrench and a box wrench that I bent in a vise for access. Many, many fractional turns to loosen and retighten. Magnet tool is really helpful as shown in the video.
Attachments:
- halfmoonwrench.jpg
Author

Replies

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Loading…

toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/

situs toto situs toto