Menu

1999 Honda Accord removing the 2nd plug wire

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 1999 Honda Accord removing the 2nd plug wire

  • Creator
    Topic
  • January 5, 2016 at 5:20 pm #848308
    JuanJuan
    Participant

      Recently checking plug wires, pulling the number 1 plug wire and goes into rough idle which I expected. When pulling plug wire number 2 the engine kills and trying to find out why. I have never had this happen before. Any ideas?

    • Creator
      Topic
    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • January 5, 2016 at 10:08 pm #848319
      dandan
      Moderator

        i am guessing you are trying to find a missfire? try removing the other wires see if that makes any difference.

        January 6, 2016 at 3:09 am #848359
        JuanJuan
        Participant

          Pulled all the spark plug wires and only number 2 kills the engine. Swapped the plug wires around and the plugs ( but in the correct order) still only number 2 kills the engine. Brand new distributor and cap. Compression test good – valves correct timing belt is on time ……

          January 6, 2016 at 8:34 pm #848409
          MantasMantas
          Participant

            I have the same problem on 2002 Honda Accord. Removing number 2 plug wire kills the engine. But I have rough idle and bucking on acceleration too. Is your car’s idle smooth and there are no other performance problems?

            January 6, 2016 at 9:39 pm #848411
            JuanJuan
            Participant

              Sounds like it’s missing when it shouldn’t also get go is not as good as it should I cannot find info of why it would kill when it shouldn’t

            • Author
              Replies
            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…
            toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
            situs toto situs toto