- This topic has 8 replies, 3 voices, and was last updated 11 years, 4 months ago by
.
-
Topic
-
Hey guys got a 99 Dodge Caravan 3.3L, 4spd Auto with 188k miles. This morning the turn signals stopped working completely. Now I should preface this situation with last night I had to pull the 20amp fuse for the hazards to replace the fuse for the ciggarette lighter (needed to charge my phone), so theres a reason the hazards are not working at the moment. Now onto the signals. None of the turn signal indicators light up on the dash when i flip the turn signal lever, i checked all of my outside lights they are fine. Im just trying to determine if its the switch itself connecting the turn signal and hazard button on the steering column, or the relay/flasher. Any suggestions? Also everything else that the turn signal lever controls works, ie wipers, hi beams etc. What do yall think?
-
Replies
-
Not yet, gotta get some money to replace that fuse. Cause that fuse popped too. Fixed that problem tho it was the inverter plugged into the power adapter I think was overloading the circuit and blowing the fuse
when you do replace the fuse and if the flasher/turn
signals still don’t work.check the flasher/turn signal
relay.Thanks College Man, I forgot to mention after pulling the fuse the signals still worked they quit working the following morning. What sucks is that relay is not cheap Im not sure if its feasible tp try and pop the ocver off the relay and see if theres corroded contacts, or maybe pull a salvage yard one.
hey guys just wanted to update ya i wound up trading the van but the new owner tells me replacing the relay actually fixed the problem
- You must be logged in to reply to this topic.