- This topic has 3 replies, 2 voices, and was last updated 8 years, 7 months ago by
.
-
Topic
-
Hi Guys,
My son and I replaced the spark plugs on his 2.5L V6. To get to the rears we had to remove the upper intake manifold. We did the plugs and are almost finished reassembly. The problem is we discovered a disconnected hose we cannot remember or figure out where it connects. I *think* it somehow connects to the long plastic piece labeled “Mutli Port Injection”, since there is a blank hose nipple on that that we cannot find a hose for but the hose appears way too short. to reach, and the hose is the wrong size to connect to the plastic piece. I am thinking maybe we lost an intermediate piece? Please see pic…
Thanks, Pop
-
Replies
-
See if this helps. You may have this diagram under the hood.
http://www.autozone.com/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c15280089905
Thank you! Turns out the tube in the pic was the one. I had just inadvertently buried it when reinstalling the upper intake. I pulled it back into position and it hooked right up! Thanks again!
- You must be logged in to reply to this topic.