Menu

1998 Honda Accord LX reverse gear slips

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 1998 Honda Accord LX reverse gear slips

  • Creator
    Topic
  • February 15, 2015 at 10:08 am #655390
    PatrickPatrick
    Participant

      1998 Honda Accord LX reverse gear is slipping. 4 cylinder v-tech engine. The reverse gear is acting up. D2 – D4 are working without issues.
      I installed a rebuilt transmission just a few months ago and it was working fine. Now the car will only drive in reverse if I gently let my foot of the brakes. If I have to drive in reverse on an uphill driveway the car struggles even if I push the engine to 3000 rpm.
      Any ideas as to what could be wrong / need to check would be much appreciated.

    • Creator
      Topic
    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • February 15, 2015 at 12:09 pm #655392
      BillBill
      Participant

        Did you put in a new torque converter?

        February 15, 2015 at 8:20 pm #655416
        PatrickPatrick
        Participant

          Sure did. Thank you for responding Bill.

          February 19, 2015 at 10:49 am #655759
          MasonMason
          Participant

            To be clear, the transmission that’s doing this was rebuilt a few months ago or you had this problem already so you installed a rebuilt one and it kept doing it?

            February 21, 2015 at 12:46 pm #655966
            PatrickPatrick
            Participant

              It is the rebuilt transmission. I did not have this issue in the past with the original transmission. I plugged in my OBD II reader, to hopefully pull error codes. Found no codes at all. Thank you for your response.

            • Author
              Replies
            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…
            toto togel situs toto situs toto