Menu

1998 Grand Cherokee front end diagnosis

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here 1998 Grand Cherokee front end diagnosis

  • Creator
    Topic
  • #458888
    619DioFan619DioFan
    Participant

      If your left pull and shimmy started right after the rotation I would suspect a prob with the tire that is now on the left front. I would start by re-rotating them back to the starting point and see if the prob goes away. if it dos then the tire that was

    Viewing 6 replies - 1 through 6 (of 6 total)
    • Author
      Replies
    • #458889
      moparfanmoparfan
      Participant

        so you know the front end has worn out parts?

        #458890
        Trcustoms719Trcustoms719
        Participant

          Is there rust or corrosion on the wheel where it meets the rotor or on the rotor that might be keeping the wheel from seating even on the rotor?_x000D_
          Try swapping the tire back to where it was._x000D_
          Check the front end for any play.

          #458891
          college mancollege man
          Moderator

            The forum is on this on this one A+ the only thing I can add is either_x000D_
            after driving the vehicle put your hand on your front rims to see if they_x000D_
            are real hot. caliper maybe sticking. or jack up the front end and spin_x000D_
            each wheel to see if free.

            #458892
            EricTheCarGuy 1EricTheCarGuy
            Keymaster

              The ‘pull’ could be caused by a tire or suspension issue, the vibration would be a tire or tire balance.

              #458893
              basszandybasszandy
              Participant

                Hey Guys,_x000D_
                _x000D_
                Thanks for your great replies. I appreciate the help you guys have given me. Will start in AM.

                #458894
                dreamer2355dreamer2355
                Participant

                  Also make sure you torque the lug nuts to the correct spec._x000D_
                  _x000D_
                  We had a VW at work a few weeks ago with a bad vibration. The lug nuts were not torqued down at all._x000D_
                  _x000D_
                  Keep us posted!

                Viewing 6 replies - 1 through 6 (of 6 total)
                • You must be logged in to reply to this topic.
                Loading…
                toto togel situs toto situs toto