Menu

1995 Pontiac fire bird 3.4L

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 1995 Pontiac fire bird 3.4L

  • Creator
    Topic
  • September 16, 2017 at 11:11 am #883528
    Conrad HutchingsConrad Hutchings
    Participant

      Hello there i got a 1995 Pontiac Fire Bird 3.4L i changed the lower and upper intake manifold gasket no problems taking it abort or putting it together plugged everything back in and same for vacuum lines went to start it and all it dose is turn over and not start has fuel and spark my question is what could it be for why it wont start

      Thanks Huchters358

    • Creator
      Topic
    Viewing 6 replies - 1 through 6 (of 6 total)
    • Author
      Replies
    • September 16, 2017 at 11:19 am #883529
      RobRob
      Participant

        do you have a bye pass hole in your intake.. it can be clodded or be turnned in the wrong direction and not taking in air… I would try cleaning that out and see if you get any luck with that you might have to clean it with a little wire through that whole… I would check that out

        September 20, 2017 at 5:12 am #883622
        Jim HutchingsJim Hutchings
        Participant

          What do you mean. Bypass hole needs to be cleaned or turned in the wrong way. The car just turns over and over but won’t start.

          Thanks
          Hutch74

          September 20, 2017 at 7:12 am #883623
          Billy AndrewsBilly
          Participant

            [quote=”Huchters358″ post=190904]Hello there i got a 1995 Pontiac Fire Bird 3.4L i changed the lower and upper intake manifold gasket no problems taking it abort or putting it together plugged everything back in and same for vacuum lines went to start it and all it dose is turn over and not start has fuel and spark my question is what could it be for why it wont start

            Thanks Huchters358[/quote]

            Can you please describe how you verified it has fuel and spark?

            September 20, 2017 at 7:23 am #883624
            Jim HutchingsJim Hutchings
            Participant

              I can not say it has fuel or spark. My son said he had spark but did not confirm fuel. Just assumed it has fuel. What’s the best way confirm for sure it’s getting fuel and spark.

              Thanks
              Hutch74

              September 20, 2017 at 7:35 am #883626
              Conrad HutchingsConrad Hutchings
              Participant

                it has has fuel pushed on the fuel line tester and fuel came out of it and let it get right empty and then turn key again and it has fuel pressure again will take the wire off number 1 cylinder tomorrow and see if there is spark

                Thanks Huchters358

                September 20, 2017 at 10:52 pm #883638
                Jim HutchingsJim Hutchings
                Participant

                  So there is fuel and spark. Still no go thou. Just turns over. Kinda lost here no idea what it could be now.

                  Thanks
                  Hutch74

                • Author
                  Replies
                Viewing 6 replies - 1 through 6 (of 6 total)
                • You must be logged in to reply to this topic.
                Loading…