Menu

1995 Mazda B3000 DTC Pulling

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 1995 Mazda B3000 DTC Pulling

  • Creator
    Topic
  • November 2, 2015 at 6:34 am #843348
    Andrew HeinrichAndrew Heinrich
    Participant

      Hi,

      I am not familiar with this particular system, I have looked under the hood for the diagnostic plugs, and they are nowhere to be found. How do I pull the codes?

      I am familiar with many other systems, just not this one.

      Thanks, Andrew

    • Creator
      Topic
    Viewing 5 replies - 1 through 5 (of 5 total)
    • Author
      Replies
    • November 2, 2015 at 6:58 am #843352
      AllanAllan
      Participant

        Hello 🙂
        The dlc is located under the hood near the power distribution box.

        Attachments:
        November 2, 2015 at 5:35 pm #843374
        Andrew HeinrichAndrew Heinrich
        Participant

          Ok, I looked this morning, and it was not there. Where could It be?

          Sent from my SM-T110 using Tapatalk

          November 2, 2015 at 7:10 pm #843382
          CharlesCharles
          Participant

            Unless you have an ODB-1 scanner you will have to use the count the flashes method.

            November 3, 2015 at 12:41 am #843417
            Andrew HeinrichAndrew Heinrich
            Participant

              I mean there is no DLC connector under the hood. But however, there is what appears to be an OBDII DLC in the cab. Does that make a difference?

              Sent from my SM-T110 using Tapatalk

              November 3, 2015 at 2:58 am #843429
              CharlesCharles
              Participant

                The Feds required ODB-II on all 1996 and new models but it is quite possible that a late 1995 model may have received the new standard. If you have a scanner or a parts store near by that will scan if for you then go for it. It may also have the capability to display flashing CEL to indicate codes with the proper jumper on the connector. Follow the link below to info on the ODB-2 identification.

                http://www.obdii.com/connector.html

              • Author
                Replies
              Viewing 5 replies - 1 through 5 (of 5 total)
              • You must be logged in to reply to this topic.
              Loading…