Menu

1995 GMC Sierra 1500 4×4 evaporator core replace

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 1995 GMC Sierra 1500 4×4 evaporator core replace

  • Creator
    Topic
  • November 14, 2014 at 11:18 pm #644434
    Andrew WebbAndrew Webb
    Participant

      Hello folks. I need to replace the evaporator core in my truck. The nut from the evap to the accumulator was rusted solid. After hours of trying to break loose, the evap line finally gave in and broke. Now I have the new evap, but I am trying to avoid disassembling the entire dash. Any thoughts or tricks as to how this can be done?

    • Creator
      Topic
    Viewing 3 replies - 1 through 3 (of 3 total)
    • Author
      Replies
    • November 15, 2014 at 12:32 am #644460
      GlennGlenn
      Participant

        See if this helps….good luck

        November 15, 2014 at 2:33 am #644504
        Andrew WebbAndrew Webb
        Participant

          Thanks for the reply, however that video is for the heater core. The evaporator core is higher up in that HVAC box.

          Thanks!

          January 6, 2015 at 1:32 am #651412
          Andrew WebbAndrew Webb
          Participant

            Anyone else have any additional thoughts? I was hoping that perhaps by removing the heater core, I would have access and be able to remove the evaporator core through the bottom of the HVAC box without removing the dash. The heater core from what I can tell can definitely be replaced without removing the dash.

            Thanks!

          • Author
            Replies
          Viewing 3 replies - 1 through 3 (of 3 total)
          • You must be logged in to reply to this topic.
          Loading…
          toto togel situs toto situs toto