- This topic has 4 replies, 2 voices, and was last updated 8 years, 5 months ago by
.
-
Topic
-
95 BMW 325i with the 2.5l 6cyl auto transmission 193k miles.
Drives perfect, any speed from rolling to 85mph no misses or anything. But if I come to a complete stop it instantly stalls, no rough idle no sputtering or weird noises. Just flat out dies, I can put it in neutral or park it starts right back up. I can give it gas at at stop and it will stay running. In park it idles perfect. I’ve cleaned the throttle body, replaced the MAF, new plugs, checked for vacuum leaks and replaced the intake boot. I can’t seem to find out what is causing this. Any help will be much appreciated, thank you in advance.
-
Replies
-
see if this helps. no cel on?
Yeah, I forgot to mention it in the original post. It’s for the o2 sensor. I also took the IAC off today and cleaned it out, it helped minimally. So it might be that, but wouldn’t it make it idle all over the place?
[quote=”xpbrownx” post=163723]Yeah, I forgot to mention it in the original post. It’s for the o2 sensor. I also took the IAC off today and cleaned it out, it helped minimally. So it might be that, but wouldn’t it make it idle all over the place?[/quote]
If you have an o2 code that can cause stalling. Could you post the code?
- You must be logged in to reply to this topic.