Menu

1994 Isuzu Rodeo v6 Manual none 4×4 clutch questio

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here 1994 Isuzu Rodeo v6 Manual none 4×4 clutch questio

  • Creator
    Topic
  • #666225
    shomosershomoser
    Participant

      hello eric or anyone in the forum… well i need to replace the clutch on my rodeo but i have an issue… when ever i try to find a clutch for it oreilly autozone or pepboyz or even online, it tells me theres 2 types of clutches… different sizes a 9 inch and a 10 incher… the 10 incher is over 300 dllrs and the 9 incher is 120+…. how can i tell wish one i have??? i cant just take it apart and do it since its my only car

    Viewing 8 replies - 1 through 8 (of 8 total)
    • Author
      Replies
    • #666226
      MikeMike
      Participant

        I’ll check my repair information at work tomorrow and see if I can get you an answer. In the meantime post up the V6 engine size, if it’s 2WD or 4WD, and any other model information you know of, I won’t be able to do much without that.

        #666240
        shomosershomoser
        Participant

          hello and thank you the engine is the v6 3.2 s model none 4×4

          #666249
          MikeMike
          Participant

            Did a few Googlings, and your Rodeo should have a data plate on the firewall:

            option code RMN = MUA transmission
            option code MM5 = BW transmission (Borg Warner)

            From what I’ve read online, I can’t definitively say which clutch size matches which transmission. Maybe those option/transmission codes might help the parts guy.

            #666250
            MikeMike
            Participant

              So far, I’ve got that your truck either does, or does not have, a Borg-Warner transmission.

              OEM part # of clutch disc if it is NOT the Borg-Warner : 8971381380
              OEM part # of clutch disc if it IS for the Borg-Warner: 2902904000

              You may be able to use those numbers crossed over into the aftermarket to find out which is which size. You’d obviously have to crawl under there and determine if its a Borg-Warner or not if you don’t already know. I’ll still do some more looking and update later on today.

              #666254
              shomosershomoser
              Participant

                thank you i will check that out after work and let you all know thanks again for the help

                #666294
                shomosershomoser
                Participant

                  ok guys so i found the sticker on the hood it says trans RMN

                  Attachments:
                  #666304
                  Andrew PhillipsAndrew Phillips
                  Participant

                    The clutch disc for the RMN transmission is 260mm (10.24″) with 24T splines.

                    #666333
                    EricTheCarGuy 1EricTheCarGuy
                    Keymaster

                      This forum is awesome.

                      Good luck with the clutch job and let us know if you run into any trouble.

                    Viewing 8 replies - 1 through 8 (of 8 total)
                    • You must be logged in to reply to this topic.
                    Loading…