- This topic has 9 replies, 3 voices, and was last updated 8 years, 11 months ago by
.
-
Topic
-
I’ve done it before with a civic but I am unable to find the actuator clip retaining screw to pull apart the actuator from the mirror body on my 94 accord. So in light of this is there a way to separate the heated glass from the actuator? Or do i have to contort and find a set of speciality skinny screwdrivers?
-
Replies
-
according to this you can pop the glass out.
http://honda-tech.com/honda-civic-del-sol-1992-2000-1/passenger-side-mirror-92-95-a-1405147/
Regretably its not as easy as that as I wish to retain the heated glass. The FSM indicates a screw that does not exist in my case, plus mentions it doesnt seperate like normal glass.
[quote=”Angrysmileyface” post=159494]Any hints?
Sent from my SM-N900V using Tapatalk[/quote]
According to the instructions theres a pin to remove once the housing is off.
[quote=”Angrysmileyface” post=159582]Unfortunately I cant get the housing off and its a defogger glass so its not detachable,[/quote]
That sucks. 🙁
Yeah I know. I’m hunting for some low profile offset screwdrivers since there is no screw in the access hole
Sent from my SM-N900V using Tapatalk
[quote=”Angrysmileyface” post=159736]Yeah I know. I’m hunting for some low profile offset screwdrivers since there is no screw in the access hole
Sent from my SM-N900V using Tapatalk[/quote]
Might be of some use?
- You must be logged in to reply to this topic.