1993 s10 blazer no start racking my brain

This topic has 19 replies, 4 voices, and was last updated 12 years, 3 months ago by EricTheCarGuy.

Creator

Topic
September 25, 2012 at 5:46 am #465256
Nathan N.
Participant
93 s10 Blazer won’t start. Getting sparkand fuel (correct pressure 60 psi). Month ago running bad cause was fuel pump sock ripped so pump inlet full of stuff, cleaned that and tank very well and ran great for a week.Then outta no where nothing, took the intake plenum off cleaned everything all injectors , sensors ran after that for a minute but back off still nothing. Now code saying bad map sensor thinks that’s from taking apart. Please help
Creator

Topic

Viewing 4 replies - 16 through 19 (of 19 total)

Author

Replies
October 23, 2012 at 5:15 am #471020
Nathan N.
Participant
I fixed the line and the codes its showing are the tps and map and its running like crap so I will stay with the tps cause its cheaper
October 23, 2012 at 5:15 am #471194
Nathan N.
Participant
I fixed the line and the codes its showing are the tps and map and its running like crap so I will stay with the tps cause its cheaper
October 23, 2012 at 11:35 pm #471210
EricTheCarGuy
Keymaster
When you say ‘fixed the line’ do you mean you replaced it? Is there any way you can check fuel pressure, perhaps borrow a gauge from the local auto parts store? I just have a hard time advising people to replace parts without evidence of their failure.
October 23, 2012 at 11:35 pm #471410
EricTheCarGuy
Keymaster
When you say ‘fixed the line’ do you mean you replaced it? Is there any way you can check fuel pressure, perhaps borrow a gauge from the local auto parts store? I just have a hard time advising people to replace parts without evidence of their failure.
Author

Replies

Viewing 4 replies - 16 through 19 (of 19 total)

You must be logged in to reply to this topic.

Loading…