- This topic has 1 reply, 2 voices, and was last updated 6 years, 9 months ago by
.
-
Topic
-
Greeting , I’m Punch 355
I have a 1977 c10 short bed with a 12 bolt rear end and I was wondering how could i cut cost with rear end drum to disc conversion. I was thinking of getting axle shaft out of a 2000 camaro and backing plate and drilling holes to mount it it and getting all braking hard ware from 2000 rear disc camaro. I’m open to suggestion.
Thank you
Viewing 1 replies (of 1 total)
-
Replies
-
It probably won’t work, at least the way you plan. The axle shafts between a ’77 C10 and 2000 F-body are almost guranteed to be different. (Inner spline count, length, etc.) If you want to give it a try, I’d recommend carefully and thoroughly reading this first-
http://www.hotrod.com/articles/ccrp-1204-budget-gm-rear-disc-brakes-swap-junkyard-builder/
Viewing 1 replies (of 1 total)
- You must be logged in to reply to this topic.