06 cobalt

This topic has 5 replies, 6 voices, and was last updated 12 years, 5 months ago by EricTheCarGuy.

Creator

Topic
July 20, 2012 at 11:00 am #458546
dreamer2355
Participant
You have posted in completely the wrong section._x000D_
_x000D_
Please repost on the “Service and Repair” section.
Creator

Topic

Viewing 5 replies - 1 through 5 (of 5 total)

Author

Replies
July 21, 2012 at 11:00 am #458547
college man
Moderator
what issue are you having. crank no start or no crank no start?_x000D_
heres some videos that may help._x000D_
_x000D_
http://www.youtube.com/watch?v=BrqkhZmD … plpp_video nc ns_x000D_
_x000D_
http://www.youtube.com/watch?v=FBUYs53
July 22, 2012 at 11:00 am #458550
Matt
Participant
I would recheck your engine’s mechanical timing first and foremost.
July 22, 2012 at 11:00 am #458548
southtextech
Participant
Well turns out no compression on two pistons!!!! GREAT!
July 22, 2012 at 11:00 am #458549
sam priem
Participant
Quoted From southtextech:_x000D_
_x000D_
Well turns out no compression on two pistons!!!! GREAT!

_x000D_
_x000D_
do a leak down test to see where the compression is going. find out whats causing the problem. bad rings, burnt valves ect._x000D_
_x000D_
eric’s cylinder le
July 23, 2012 at 11:00 am #458551
EricTheCarGuy
Keymaster
If you don’t have compression on 2 cylinders I would recheck your mechanical timing and make sure that’s correct first before doing a leak down test.
Author

Replies

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Loading…

toto togel situs toto situs toto