- This topic has 3 replies, 3 voices, and was last updated 11 years, 9 months ago by
.
-
Topic
-
I have a 2005 Accord V6 and the compliance bushings on the lower control arms need to be replaced within the next few months. I am having problems with finding a local shop that will take my control arms after I remove them and then press-out the old bushings. So I was looking at replacing the control arms with an after market set. So my question is does anyone have any opinions on Beck-Arnley, Dorman, or Moog after market lower control arms ?
-
Replies
-
I’m not sure about beck-arnley here in Canada, but i know Moog is the best in my opinion you can get. Never really tried any doorman products my local auto-parts stores carries either Napa, or Moog.
Yes, I am looking at Moog as my first choice and Beck Arnley is a close second. There’s only about $10 total difference in cost between the two. No machine shops close me, thus the reason for just replacing with new control arms and be done with it. None of the local indy shops want to offer to do this either. Thanks for your feedback.
- You must be logged in to reply to this topic.