Menu

04 grand am engine running rough intermittantly

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here 04 grand am engine running rough intermittantly

  • Creator
    Topic
  • #507852
    Jon TaylorJon Taylor
    Participant

      I have a 2004 grand am se with the 2.2L
      for a day of driving around the engine would intermittantly run very rough and the check engine light would blink for a few minutes then would stop blinking and car ran fine…
      this happenned several times that day, then finally the check engine light stayed on.
      anyone have any suggestions on what it could be?

    Viewing 7 replies - 1 through 7 (of 7 total)
    • Author
      Replies
    • #507882
      KirkKirk
      Participant

        Most are going to suggest getting the check engine light codes and report back 🙂

        Gives us all somewhere to start off.

        Bad idle I would think vacuum leak, o2 sensors or something to that nature. Could be a million things.

        *edit*
        forgot to add, to get the code checked free autozone, napa or a similar parts store. If you look online or call local auto repair shops most of them will do a simple code read for free as well. (Chances are good the mechanic will suggest whats wrong when he checks so you may get the repair done there)

        #507883
        Jon TaylorJon Taylor
        Participant

          ill get a code reader today

          #507887
          KirkKirk
          Participant

            Not sure if itll work but its worked on most of the cars Ive owned. Quick and easy.

            Its the paperclip method to pull up your CEL codes. (so you dont need a scanner or to go to a store)

            http://wiki.answers.com/Q/How_do_i_check_grand_am_check_engine_codes

            “Paper-clip method:
            Install a jumper wire or paper clip between the last and second to last terminals from the left on the top row of the ALDL connector with ignition turned on. These are the first and second terminals from the right side of the top row of the connector. The check engine light will flash codes. The first code flashed will be 12 indicated by flash (1) pause flash flash (2) pause. Codes will be flashed twice before moving on to the next code. After all codes are flashed, code 12 will repeat. Three consecutive 12s indicate no codes.

            Some older models do not flash 12 if there are codes present. “

            #507936
            Jon TaylorJon Taylor
            Participant

              ok i got a code reader and this is what it came up with…

              P0304 Cylinder 4 Misfire Detected
              P0455 Evaporative Emission Control System Leak Detected (gross leak)

              #507938
              angelangel
              Participant

                I would guess that u might have a spark plug or wire misfiring. Or a Air take sensor or valve need to be replaced. hope this helps.

                #507940
                Jon TaylorJon Taylor
                Participant

                  what is odd to me is the rough idle only went on intermittanly for 1 day… car runs fin now, just keep getting check engine light

                  #508745
                  JoshJosh
                  Participant

                    when was the last time the car had a tune up? also I need more information on this car, like how many miles are on it?

                  Viewing 7 replies - 1 through 7 (of 7 total)
                  • You must be logged in to reply to this topic.
                  Loading…
                  toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
                  situs toto situs toto