Quoted From fitone:
The link provided as stated is a good one to recheck your work. The other link provided only applies to 94-97 Accords with a 4 cylinder engine.
Eric has a good video for the 1998-2002 V6 Honda/Acura. See this link http://www.youtube.com/watch?v=HRp6RWZ1egM
Just a dumb question, but did you disconnect the negative battery cable after doing what you had described in order to clear the code ? Be sure you have the radio code handy if it is still the original radio.
Also make sure all electrical and hoses are attached properly. Let us know if this helps.
Thanks for the feedback. I did watch the video and performed the service via the TSB. I cleared the code with my OBDII reader. I’ve done rebuilds and engine swaps so it wasn’t a difficult task. Everything is hooked up correctly, I cleaned and soaked the intake thoroughly. Just doesn’t make sense.